STS Datalogger Resistivity Meter
The Botron B8590 STS Datalogger Resistivity Meter simplifies surface resistance testing while capturing critical data for traceability and compliance. Designed to scan, test, and store results, it brings accuracy, efficiency, and documentation into one handheld device.
Overview
The Botron B8590 STS Datalogger Resistivity Meter is designed for ESD program managers who need reliable surface resistance measurements with built-in data capture. With automatic test voltage selection and support for multiple resistance measurements, it streamlines verification while reducing manual recording and human error.
Integrated memory allows test results to be stored directly on the device, capturing essential environmental and test information for later review. Combined with PC-based software and barcode scanning capability, the B8590 supports traceability, audit readiness, and consistent testing across workstations and facilities.
Scan. Test. Store.
An integrated barcode scanner allows operators to identify test stations, perform measurements, and store results in one continuous workflow. Test records are saved internally, reducing paperwork and improving traceability.
Automatic Test Voltage Selection
The meter automatically switches between test voltages based on the resistance measured, ensuring accurate readings without manual adjustment. This simplifies testing while maintaining consistency across measurements.
Built-In Data Logging
Test results are stored directly on the device, including key test and environmental information for each measurement. Stored data can be downloaded to a PC for reporting, review, and audit support.
Designed for ESD Program Compliance
The B8590 supports resistance testing methods used in ESD-controlled environments and displays clear pass or fail results. It provides a reliable tool for verifying surfaces while supporting standardized ESD control procedures.
Technical Information
Display
160x100 LCD
Display Information
Date, Time, Temperature, Humidity,
Serial Number, Test Result
Test Voltage
10V & 100V (auto)
Test Range
10³ – 10¹²
Battery
Electrodes
Two 5 lb weights 4mm jacks
Electrodes
Calibration port 2mm jacks
Ground Port
Size
5.77” x 3.25” x 1.52”
Accuracy Range
+/- 10%
