Dissipative Premium Two Layer .08″ Rubber ESD Mat
Botron’s Type T2+ Premium Rubber Table Mats dual layer design provides excellent electricals and superior durability. It exceeds both EOS/ESD and Department of Defense requirements. Available in Blue, Gray and Green rolls, and pre-cut table mats with hardware.
Overview
Botron’s Dissipative Premium Two Layer Rubber ESD Mat is hands down the best choice for a dissipative surface. While most matting relies on a very thin conductive layer (think carbon paper), Botron’s ESD rubber matting is volumetric in its conductive properties, providing a more stable path to ground.
Moisture-Lock Technology
Mat will not curl and is guaranteed to lay flat on the work surfaces. Moisture-Lock helps prevent the mat from drying out, cracking, shrinking and elongation.
2-Layer Construction
A top dissipative rubber layer maintains the perfect surface for ESDS providing a path to ground at or above 35M Ohms. This level of resistance helps control the discharge path when grounded operators are placing and maneuvering static sensitive devices at the workbench.
Superior Electricals
A highly conductive rubber underside gives way for an excellent path to ground. With a volumetric resistance below 1M Ohm, monitoring the grounding path for both conductive properties and its connection to ground make this mat ideal for every ESD Protected Area (EPA). The 2-layer construction also ensures the discharge path does not travel the length of the dissipative top surface to ground, instead from layer to layer where the discharge happens.
More Than Meets the Eye
- • Solder Resistant Surface
- • UV resistant color stability and conductivity
- • Reversible from Dissipative to Conductive
- • Non-Skid Backing
- • Chemical and Abrasion Resistant
- • Lead-Free RoHS Compliant
Technical Information
Material
Top Layer
Bottom Layer
RTT
Resistance Top to Top
RTG
Resistance to Ground
Charge Decay Time
Standards
Meets or exceeds any one or combination of the following.
