Single Operator and Mat Continuous Monitor
Botron's Single Operator and Mat Continuous Monitor is designed to monitor resistance of both the work surface and the operator. It comes with a built in audible alarm and LED, triggering either when either the operator or work surface falls out of spec, becomes disconnected, or ground is lost. It is a fixed resistor system and is go/no go. A full time monitoring system is necessary to reduce latency on the assembly line.
Overview
Single conductor (more commonly called single wire) ESD wrist strap monitors detect capacitance. These simplified monitors sense the input connection but do not discern precision resistance. They also offer additional value by monitoring the worksurface (ESD Mat) and the ground connection. The built-in LED offers local visual alerts, and a small piezo buzzer offers a nice clear audible alert to the operator at the bench.
This is an entry point to monitoring personnel at the bench. If you are only verifying your Single Wire ESD Wrist Straps via a ESD tester it is possible your wrist strap may fail or the operator may exceed the allowable resistance path to ground while at the bench, exposing sensitive components to electrostatic discharge.
What’s your Type?
Universal support for a standard 4mm banana type grounding coil cords.
Single Wire Connection
Supports 1 operator via Single Wire ESD Wrist Strap.
ESD Mat Monitoring
Monitors 1 ESD Mat ground plane.
Local Alerts
A multi-color LED and piezo buzzer provide the operator with both visual and audible feedback in the event of a ground system fault.
Ground Alarm
Alarms when and if grounding connection is lost.
Technical Information
Operator
- Pass - <8meg
- Fail High - >8.5meg
- ± 10%
Mat
- Pass - >0 to 6.75meg
- Fail High - >6.75meg
- ± 10%
Condition
- Safe - 1meg
- Fault - 6.5meg
Power
Visual Alarm
- Green LED - Safe
- Red LED - Fault