Botron Company Inc.

Botron Company Inc. home page header image

ESD Floor Finish

Botron’s Cleanstat floor finish prevents static generation from floor friction, producing a highly effective ESD safe floor surface. When wearing proper ESD footwear the floor will also dissipate personnel’s static charge as they walk and work.

Features

Specifications

Part Numbers

esd-floor-finish

Features

Overview:
Static Dissipative ESD Polymer Floor Finish is designed to dissipate static charges and eliminate static generation. It will provide a clear, high gloss finish and can be applied on any hard surface like vinyl floor tile, sealed concrete, terrazzo and others. It is recommended to be used in environments of 60% R.H. or lower.

Notes:
Static dissipative
Rubber streak resistant
Fast drying
High gloss
Long lasting
Non-flaking
Non-slip
Cross-linked polymer, water based
Can be recoated
Lead-free RoHS compliant

Grounding:
Using ESD heel grounders with this Cleanstat 4 floor finish gives your staff the freedom to move around the work area performing ESD functions.

Application:
3 coats needed for maximum effectiveness
30 to 45 minutes dry time between

Specifications

Physical Data:
P.H. 8.5
Solids 18.0 +/- 0.5%
Specific gravity 1.020
Boiling point near 212oF

Material:
Nonvolatile solids 18+/-6% colors 100pcs
Total Active 22%

Electricals:
Resistivity: 106 – 1010 Ohms @100 volts at 12°/0 FH
+/- 5000v static decay less than 0.1 seconds (@40% R.H.)
Zero charge generation

Finish:
High Gloss

Click here to download Spec Sheet

Part Numbers:

B8101 Floor finish 1 gallon
B8105 Floor finish 5 gallon
B8155 Floor finish 55 gallon

© 2015 Botron Company Inc.